Click here to see a sample Energy Performance Certificate for use in Scotland.
Sapper version 8 is the ideal design tool for showing compliance with Building Regulations ADL1A, Northern Ireland Technical Booklet F1 August 2006, and
Scottish Technical Handbook 2007 Domestic Section 6.
It checks compliance by comparing the Dwelling Carbon Emission Rate with the Target Emission Rate derived from a notional dwelling of the same size and shape.
Sapper version 8 also includes a facility to check compliance for over-glazed house extensions.It will test for the Fabric Standards, Comparative Heat Loss method
and the total dwelling emissions methods as required by ADL1B and in Scotland it will show compliance with Technical Standards section 6.2.9 U-values method and the Compensatory approach.
For over-glazed extensions, Sapper version 8 will checks compliance by showing that the carbon emissions from the house plus the extension are no greater than the emissions from the existing house
plus a notional extension. Sapper calculates the notional extension from the extension information entered.
For over-glazed extensions it is sometimes required to make improvements to the existing house to reduce the carbon emissions, such as improving the heating boiler or adding extra insulation.
So what's new? Apart from the generation of EPC and several minor changes, the latest amendments include facilty to enter details for :
- Micro wind turbines
- Mechanical ventilation including heat-recovery - data from database, datafile or defaults
- Community heating - improvements in methodology - separate DHW community heating.
- Low and Zero Carbon Technologies
The Standard Assessment Procedure (SAP 2005 version 9.81) is the Government's standard procedure for assessing
home energy efficiency. The SAP is intended to give householders, architects, builders etc.
a measure of the overall efficiency of a home in a way that is simple and easy to understand.
The SAP rating is based on the energy costs associated with space heating, water heating, ventilation and lighting,
less cost savings from energy generation technologies.
It is adjusted for floor area so that it is essentially independent
of dwelling size for a given built form. The Environmental Impact Rating is expressed on a scale of 1 - 100, the higher the better.
Having calculated the DER and TER, if the dwelling emissions are too high, Sapper version 7 now includes a diagnosis tool to give help and guidance on
how to achieve compliance. This makes the program an invaluable design tool.
There are five criteria to demonstrate compliance with the building regulations.
- The dwelling carbon emissions (DER) must not be more than the target carbon emissions (TER). The TER is calculated for a notional building with standard characteristics.
- Limiting design flexibility by meeting standards for the building fabric.
- Limiting the effects of solar gain in summer.
- Commisioning of heating and hot water systems.
- Providing information - operating and maintenance instructions.
The calculation depends on a number of factors including:
- materials used for the construction of the dwelling
- thermal insulation of the building fabric
- ventilation characteristics of the dwelling
- efficiency and control of the space and water heating systems
- solar gain characteristics of the dwelling, and its region.
- the fuels used for space and water heating, ventilation and lighting
- renewable energy technologies
SAPPER version 8.0x is an easy-to-use calculator which makes a
daunting task easy.
It is an invaluable design tool for any architect who wants
to make sure that the design is energy efficient and that it
complies with the Building Regulations. Building Control Officers like the ease of recording the data and checking the U-values.
SAPPER version 8
- BRE approved as suitable for assessing compliance with building regulations ADL1 and Scottish Technical Handbook Section 6 Domestic.
- Easy to input the necessary data.
- Easy to edit inputs with dynamic calculation updates.
- Can demonstrate compliance for extensions to dwellings.
- Reads the SEDBUK boiler database. SEDBUK efficiencies can give higher SAP ratings.
- Prints the calculation in approved format. Will also print to PDF writer if required.
- Includes a U-value calculator (with condensation prediction) for walls, floors, roofs and windows,
which includes database of commonly used materials. click here for more details.
- Output includes compliance checklist and list of key features for England and Wales.
- Prints Energy Performance Certificate and Energy Report for new dwellings in Scotland.
- Prints Predicted Energy Rating (PEA) for dwellings marketed before completion
- Comprehensive run-time 'Help'.
- Competitively priced.
